inquiry@edge-band-factory.comWhatsApp +86 176 2154 1688+86 176 2154 1688Free samples & colour matching
0

UV Board vs Acrylic vs PET: Choosing a Kitchen Door Surface

Compare high gloss UV MDF, acrylic faced MDF and PET/PETG boards for kitchen doors: hardness, gloss, colour depth, price and the right edge banding.

Short answer

UV board is the hardest and most economical gloss surface, acrylic gives the deepest colour and mirror metallics, and PET/PETG offers an eco-friendly film with consistent colour in gloss or super matt. Pair UV and acrylic with high gloss or 3D acrylic edges, and PET with same-colour PET-matched edges.

UV Board vs Acrylic vs PET: Choosing a Kitchen Door Surface

Side-by-side comparison

Kitchen door board surfaces compared
UV MDFAcrylic MDFPET / PETG MDF
SurfaceCured lacquerPMMA sheetPolyester film
Hardness2H–4HAbout HAbout 2H
Gloss and depthHighHighest, deep colourHigh, very even
FinishesGloss, super matt, marbleGloss, matte, mirror metallicsGloss, super matt, textured
Relative priceLowestHighestMiddle
Matching edgeHigh gloss PVC or 3D acrylicAcrylic, two-tone 3DSame-colour PVC/ABS

UV MDF

UV lacquer is cured in seconds under ultraviolet lamps. A thick 0.3–0.5 mm coat resists scratches and cleaning chemicals and is the most cost-effective gloss door. Super matt UV, cured with excimer lamps, is the leading anti-fingerprint option.

Acrylic

A PMMA sheet laminated to MDF gives colour that looks like it sits under glass. It is softer than UV, so keep protective film on until installation, but it is the only way to get mirror gold, rose gold and champagne doors.

PET and PETG

PET films are recyclable and odourless, with a very even colour and no orange peel. They are a good middle ground for brands that want gloss or super matt with a better environmental story.

How to choose

  1. Start with the look: mirror metallic means acrylic; anti-fingerprint matt means super matt UV or PET.
  2. Check the use: busy family or commercial kitchens favour harder UV surfaces.
  3. Check the budget: UV is lowest, acrylic highest.
  4. Order the matching edge banding from the same factory to avoid colour mismatch.

Mentioned in this guide

Products to sample

Free samples are available for all of them.

  • PVC

    Solid Color PVC Edge Banding

    The everyday edge for white, grey and plain-colour panels. Stays white after trimming and runs clean on any edge bander.

  • PVC

    Wood Grain PVC Edge Banding

    Printed oak, walnut, maple, cherry and beech grains that line up with the melamine decor on your board.

  • PVC

    High Gloss PVC Edge Banding

    A lacquered, mirror-like edge for high gloss UV and acrylic doors, with volume pricing from 10,000 m.

Technical support

Ask our technical team

Questions about your machine, glue or material choice? Our engineers answer within one working day.

Ask a question

For example: 20,000 m of 1 × 22 mm white PVC, or 2 × 40 HQ of 18 mm UV boards.

Send your inquiry

Tell us the product, size, colour and quantity. We reply within 12 hours on working days.

For example: 20,000 m of 1 × 22 mm white PVC, or 2 × 40 HQ of 18 mm UV boards.

Search products