All products
-
Solid Color PVC Edge Banding
The everyday edge for white, grey and plain-colour panels. Stays white after trimming and runs clean on any edge bander.
-
Wood Grain PVC Edge Banding
Printed oak, walnut, maple, cherry and beech grains that line up with the melamine decor on your board.
-
High Gloss PVC Edge Banding
A lacquered, mirror-like edge for high gloss UV and acrylic doors, with volume pricing from 10,000 m.
-
Super Matt PVC Edge Banding
A soft-touch, low-gloss edge for super matt UV, PET and acrylic boards that hides fingerprints.
-
Synchronized Embossed Edge Banding
Pore-embossed edges that match the texture of synchronized (EIR) melamine boards, not just the colour.
-
Marble Pattern PVC Edge Banding
Stone and marble edges in gloss, matt and diamond finishes for marble UV boards, HPL and counters.
-
Digital Printing Edge Banding
Any decor, any pattern, no printing cylinder. The quickest way to match a new board design.
-
ABS Edge Banding
Chlorine-free and recyclable, with higher heat and impact resistance than PVC. The choice for eco-label furniture.
-
Two-Tone 3D Acrylic Edge Banding
A clear acrylic layer over a printed colour gives a glass-like depth line on high gloss doors.
-
Mirror High Gloss PMMA Edge Banding
Single-colour PMMA with a mirror finish and UV stabilisers, made for high gloss UV and acrylic boards.
-
Laser Edge Banding (Zero Glue Line)
A co-extruded functional layer melts onto the board: no glue, no line, no moisture path.
-
Aluminum Film PVC Edge Banding
Real aluminium film laminated to a flexible PVC base, in brushed, mirror and gold finishes.
-
Sparkle Glitter PVC Edge Banding
Diamond-effect metallic pigments in champagne gold, rose gold, burgundy, emerald and midnight blue.
-
Pre-Glued Edge Banding
Hot melt is factory-applied, so the edge can be ironed on or run on hand-held banders.
-
Melamine Paper Edge Banding
Thin, economical edge tape for shelves, back panels and budget furniture.
-
High Gloss UV MDF Board
Eight to twelve coats of UV lacquer on MDF give a mirror surface that resists scratches, moisture and cleaning chemicals.
-
Super Matt UV MDF Board
Excimer-cured, velvet-touch UV surface with 3H hardness that hides fingerprints.
-
4H Ultra High Gloss (UHG) MDF Board
Our hardest gloss surface: 4H pencil hardness and a mirror finish for high-traffic fronts.
-
High Gloss UV Marble Board
Marble looks at a fraction of the weight and cost of stone, for wall cladding and cabinet doors.
-
Super Matt Stone Grain UV Board
Stone, concrete and terrazzo decors in a soft-touch, anti-fingerprint super matt finish.
-
High Gloss Acrylic MDF Board
Imported acrylic film on MDF for deep colour and mirror gloss, including gold and rose metallics.
-
Super Matte Acrylic Board
A silk-smooth super matte acrylic face with the same-colour edge banding included.
-
High Gloss PET / PETG MDF Board
Eco-friendly PET or PETG film on MDF in high gloss and super matt, with matching edges.
-
Matt Grille Pattern PET Panel
A fluted, grille-embossed matt PET surface that adds texture without machining.
-
Synchronized Melamine MDF Board
Embossed-in-register texture that follows the printed grain, on both faces.
-
Double-Sided 5×9 ft Synchronized Board
A 1549 × 2769 mm sheet that covers 23% more area than 4×8 and cuts joints on full-height units.
-
Large Size 2100×2800 mm Synchronized MDF
Extra-wide 2100 × 2800 mm panels for seamless hotel walls and full-height joinery.
-
Oak Melamine Faced Chipboard (MFC) 1549×2769
Smoked, natural and grey oak MFC in the efficient 5×9 ft format, with E0 glue.
-
7×9 ft Large Melamine Board (2100×2800)
Big 2100 × 2800 mm melamine panels that reduce joints and cutting waste.
-
3D Deep Texture Board
Deep-pressed wood, stone and textile reliefs you can see across the room and feel by hand.
-
Compact HPL Toilet Partition Board
Solid phenolic compact laminate for toilet cubicles and showers: waterproof through the core.
-
Compact HPL Table Top & Worktop
Thin, strong and waterproof worktops for kitchens, dining tables and laboratory benches.
-
Compact HPL Locker Board
Hard-wearing compact laminate for wet-area lockers in gyms, schools and spas.
-
Decorative HPL Sheet (0.7–1 mm)
Thin, tough laminate for surfacing cabinets, counters and walls, including postforming grade.
-
UV High Gloss HPL Sheet
The impact strength of HPL with a UV mirror gloss, for doors and counters.
-
Powder Coated MDF Board
A seamless 360° powder coat wraps every face and edge: no edge banding, no joints, zero VOC.
-
HMR Green Moisture-Resistant MDF
The green-core MDF for kitchens and bathrooms, plain or faced with any of our surfaces.
-
Plain Sanded HDF Panel
Dense, smooth HDF for CNC machining, painting and laminating.
-
EVA Hot Melt Adhesive for Edge Banding
High green-strength EVA granules for automatic and manual edge banders, no stringing.
-
PUR Hot Melt Adhesive for Edge Banding
Moisture-curing PUR for waterproof, heat-resistant joints with an almost invisible glue line.
-
Self-Adhesive Screw Hole Covers
Round PVC stickers colour-matched to your board, to hide cam and screw heads.
-
Adjustable Cabinet Legs
Plastic levelling feet with plinth clips, adjustable for uneven floors.
-
Aluminum PVC Skirting Board (Plinth)
Waterproof kitchen plinths with an aluminium face that clip onto adjustable legs.
No products match. Try a broader word such as “PVC”, “gloss” or “HPL”, or send us an inquiry.

Custom colours
Can’t find your colour?
We hold more than 500 edge colours and develop new ones from your board sample in 3–5 days. Tell us what you are looking for.
- inquiry@edge-band-factory.com
- WhatsApp +86 176 2154 1688
- +86 176 2154 1688
- Mon–Sat, 08:30–18:00 (GMT+8)











































