inquiry@edge-band-factory.comWhatsApp +86 176 2154 1688+86 176 2154 1688Free samples & colour matching
0

Edge Banding Width and Thickness: A Practical Sizing Guide

How to choose edge banding width and thickness for 16, 18 and 25 mm boards, with a sizing table, roll lengths and how to estimate metres per order.

Short answer

Order edge banding 3–5 mm wider than the board thickness (22 or 23 mm for 18 mm board) and choose thickness by wear: 0.4–0.6 mm for hidden edges, 1 mm for standard doors and carcasses, and 2–3 mm for desks, worktops and high-traffic edges.

Edge Banding Width and Thickness: A Practical Sizing Guide

Choosing the width

Edge banding is always a little wider than the board so the edge bander can trim it flush on both faces. The overhang is usually 1.5–2.5 mm per side.

Recommended edge banding width by board thickness
Board thicknessRecommended width
8–10 mm12–15 mm
12 mm16–17 mm
15–16 mm19–21 mm
18 mm22–23 mm
19 mm23–24 mm
25 mm28–30 mm
36–38 mm (double)40–42 mm

Choosing the thickness

  • 0.4–0.6 mm: shelves, back edges, internal parts. Lowest cost per metre.
  • 0.8–1.0 mm: the standard for doors, carcasses and visible edges.
  • 2 mm: desk tops, worktops, school and office furniture. A 2 mm edge can be radiused to R2 for a soft, durable corner.
  • 3 mm: heavy-duty shelving, retail fixtures and commercial furniture.

Roll lengths

Thin edges come in longer rolls. Our standard is 200 m per roll for 0.4–0.8 mm and 100 m per roll for 1–3 mm. Jumbo rolls of up to 600 m are available for automatic lines that stop less for roll changes.

Estimating how many metres to order

Add up the perimeter of every banded edge, then add 8–10% for trimming waste and machine start-up. For a typical 600 mm kitchen base cabinet with a banded door, two sides, a bottom and a shelf, expect about 7–9 m of edge banding. Use our edge banding calculator for a quick estimate.

Frequently asked questions

What width edge banding do I need for 18 mm MDF?

22 mm or 23 mm. The extra width is trimmed flush on both faces.

Is thicker edge banding always better?

No. Thicker edges are more durable but cost more and need a radius scraper. Use 1 mm for most visible edges and 2 mm where furniture is knocked.

Mentioned in this guide

Products to sample

Free samples are available for all of them.

  • PVC

    Solid Color PVC Edge Banding

    The everyday edge for white, grey and plain-colour panels. Stays white after trimming and runs clean on any edge bander.

  • PVC

    Wood Grain PVC Edge Banding

    Printed oak, walnut, maple, cherry and beech grains that line up with the melamine decor on your board.

  • PVC

    High Gloss PVC Edge Banding

    A lacquered, mirror-like edge for high gloss UV and acrylic doors, with volume pricing from 10,000 m.

Technical support

Ask our technical team

Questions about your machine, glue or material choice? Our engineers answer within one working day.

Ask a question

For example: 20,000 m of 1 × 22 mm white PVC, or 2 × 40 HQ of 18 mm UV boards.

Send your inquiry

Tell us the product, size, colour and quantity. We reply within 12 hours on working days.

For example: 20,000 m of 1 × 22 mm white PVC, or 2 × 40 HQ of 18 mm UV boards.

Search products